Motion Sensor Light Switch for Single Pole, 120V/277VAC

The BESTTEN motion sensor switch is designed to detect motion from a heat-emitting source, such as a person entering a room, within its field-of-view and automatically turns the lights ON. The lights will remain ON until no motion is detected and the scheduled time-delay has expired.

The switch is built with advanced passive infrared (PIR) technology and offers two working modes: Occupancy (OCC) mode and Vacancy (VCC) mode. In OCC mode, the lights will turn on and off automatically. In VCC mode, the lights will turn on manually and off automatically.

The time delay can be adjusted to turn the light off at preset intervals of 15 seconds (Test), 1 minute, 5 minutes, 15 minutes, or 30 minutes of inactivity. The sensor sensitivity can also be adjusted to control the desired detection range.

The light setting is used to adjust the detected ambient light level. The switch will turn on when the light falls below the set ambient light level. If ambient light is not a concern, the setting can be set to the maximum to allow the sensor to turn on and off regardless of ambient light conditions.

Before installation, it is important to confirm that there is a Neutral Wire available in the wall box. The Hot Wire should be connected to the black wire on the switch, the Load Wire to the red wire, the Neutral Wire to the white wire, and the Ground Wire to the green wire.

The BESTTEN motion sensor switch is compatible with a variety of load types, including 120V 300W LED, 120V 800W incandescent lamp, 800W/120V fluorescent lamp Rapid Start, and 1200W/277V fluorescent lamp Rapid Start. It operates at 120V/277VAC, 60Hz, and 1/6HP.

The switch is available in various product options, including single pole, 3-way, double switch, and 4-way configurations. Wall plates are included, and the switches are UL listed for safety.

product information: